Rorke Data The Galaxy 65 Specifikace Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 100
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
Galaxy GHDX-2422S-8+12F4D Installation and Hardware Reference Manual
Drive Tray Installation
2-14
2.10 Drive Tray Installation
Once the hard drives have been installed in the drive trays, the drive trays must be
installed into the subsystem.
WARNING!
All drive trays must be installed into the enclosure even if they do not contain a
hard drive. If the trays are not installed into the enclosure, the ventilation required
for cooling will be disturbed and the subsystem will overheat.
Step 1. Make sure that the hard drive is secured to the drive tray. Make sure
the key-lock is in the unlocked position. The key-lock is unlocked if the
groove on its face is in a horizontal orientation. If the groove is in a
vertical position, as shown in Figure 2-9, then the key-lock is locked
and the front flap on the drive tray cannot be opened.
Figure 2-9: Front View of an Individual Drive Tray
Step 2. Open the front flap on the drive tray. (See Figure 2-10) To open the
front flap, push the release button (shown in Figure 2-9) on the front
bezel. The front flap will open in an upward direction.
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 99 100

Komentáře k této Příručce

Žádné komentáře