Rorke Data The Galaxy 65 Specifikace Strana 39

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 124
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 38
Galaxy Web GUI User Reference Manual
3-4 Creating Logical Drives
4. Write Policy: Select a policy if you want a
specific caching mode to stick around with the
logical drive. Selecting default will allow firmware
to dynamically determine the caching mode of all
logical drives.
IMPORTANT!
The “Write-back” and “Write-
through” parameters are
permanent for
specific logical drives. The “Default”
selection, however, is more complicated and more likely
equal to “not specified.”
If set to “Default,” a logical drive’s write policy is controlled
not only by the system-level caching mode setting, but also
by the “Event trigger” mechanisms. The “Event Trigger
mechanisms automatically disable the write-back caching
and adopt a conservative “Write-
through” mode in the
event of battery or component failures.
5. Assignment: If your subsystem is managed by
more than one RAID controller (dual-redundant
RAID controllers), you can manually divide the
work load between these two controllers by
assigning logical drives to different controllers.
6. Initialization: Two initialization modes are
available: Online and Offline. The online mode
allows you to immediately distribute I/Os to the
logical drive and avail the logical drive for the
following configuration processes, e.g., RAID
partitioning.
7. Power Saving: This feature supplements the
disk spin-down function, and supports power-
saving on specific logical drives or non-member
disk disks with an idle state and the 2-stage
power-down settings.
Advantages: see the power saving features
below.
Applicable Disk Drives:
Logical drives and non-member disks [including
spare drives and un-used drives (new or
formatted drives)]. The power-saving policy set
to an individual logical drive (from the View and
Edit Logical Drive menu) has priority over the
general Drive-side Parameter setting.
Zobrazit stránku 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 123 124

Komentáře k této Příručce

Žádné komentáře